Docker et Kubernetes

# mcpd: one service, one volume.
#
# The volume is most of the reason this file exists. Without it the SQLite file
# lives in the container's writable layer, and `docker compose down` takes every
# trace with it.
#
# Copy .env.example to .env and fill it in before running this. The keys are not
# in this file on purpose: a compose file is committed, a .env file is not.

services:
  mcpd:
    image: ghcr.io/mcpd/mcpd:0.1.0
    restart: unless-stopped

    # Published on the loopback interface of the host, so nothing outside this
    # machine can reach the port even while you are still setting up keys.
    ports:
      - "127.0.0.1:4317:4317"

    environment:
      MCPD_LISTEN: 0.0.0.0:4317
      # Set the path explicitly. If this and the mount below ever disagree, the
      # daemon writes to the container layer and the volume stays empty.
      MCPD_DATA: /data/mcpd.db
      MCPD_PROJECT: default
      MCPD_RETENTION_DAYS: "30"
      MCPD_LOG_FORMAT: json
      MCPD_INGEST_KEYS: ${MCPD_INGEST_KEYS:?set MCPD_INGEST_KEYS in .env}
      MCPD_READ_KEYS: ${MCPD_READ_KEYS:?set MCPD_READ_KEYS in .env}
      MCPD_REDACT_KEY: ${MCPD_REDACT_KEY:?set MCPD_REDACT_KEY in .env}
      # The run store: a second file on the same volume.
      MCPD_RUNS_DATA: /data/mcpd.runs.db
      # The two scopes of the run surface. Unset accepts the write keys, which
      # here are the ingest keys; set them in .env once a worker runs outside
      # this host. No value here on purpose: Compose passes the variable only
      # when .env sets it, and `${VAR:-}` would pass an empty string, which the
      # daemon reads as one empty key rather than none.
      MCPD_EXECUTE_KEYS:
      MCPD_WORKER_KEYS:
      MCPD_REQUEST_TIMEOUT_SECONDS: "30"
      # The two bounds on one request: bytes of body, and signals in it once
      # decoded. Lower the first on a small host, since it is what decides how
      # much memory one request can take before anything is parsed.
      MCPD_MAX_BODY_BYTES: "33554432"
      MCPD_MAX_BATCH_SIGNALS: "10000"
      # Set MCPD_CORS_ORIGINS when the interface is served from another origin,
      # MCPD_REDACT_KEY_CONTAINS to mask fields the built-in rules do not know,
      # and MCPD_REDACT_MAX_STRING to lower the 128 KiB cap on a stored string.
      # MCPD_SIGNUP=true opens account sign-up; the accounts go to
      # MCPD_ACCOUNTS_DATA, beside the data file by default. Behind a proxy, set
      # MCPD_CLIENT_IP_HEADER and MCPD_TRUSTED_PROXY_CIDRS so the sign-up and
      # log-in limits count clients rather than the proxy.

    volumes:
      - mcpd-data:/data

    # No healthcheck here, because the image has one: it requests /healthz
    # every 30 seconds with the busybox wget in the image, on the port in
    # MCPD_LISTEN, and `docker compose ps` shows the result. It is the liveness
    # endpoint, never /readyz, so a slow query does not mark the daemon sick.
    # Docker does not restart a container for being unhealthy; the restart
    # policy above acts when the process exits.

    # Longer than the 30-second request timeout above, so a request still
    # running at `docker compose down` can finish before Docker kills it.
    stop_grace_period: 45s

volumes:
  mcpd-data:

# Copy to .env and replace every value. Generate each one with:
#   openssl rand -hex 32

# Keys permitted to write. Comma-separated, one per fleet or per team, so a
# leaked key can be revoked without re-deploying every agent.
MCPD_INGEST_KEYS=replace-me-ingest

# Keys permitted to read stored prompts and completions. Never the same value
# as an ingest key.
MCPD_READ_KEYS=replace-me-read

# Salt for the hashes redaction leaves behind. Without it the digests of short
# identifiers can be recovered by guessing.
MCPD_REDACT_KEY=replace-me-redact

# Keys for the run surface. Leave both commented out and the ingest keys are
# accepted for starting runs and claiming steps, which is fine while every
# worker runs on this host. Set them once a worker runs elsewhere: the worker
# key lives in the process that runs step bodies and opens nothing that reads a
# prompt. Uncomment a line only with a value: `MCPD_WORKER_KEYS=` with nothing
# after it passes an empty string, not an unset variable.
# MCPD_EXECUTE_KEYS=replace-me-execute
# MCPD_WORKER_KEYS=replace-me-worker

apiVersion: apps/v1
kind: Deployment
metadata:
  name: mcpd
  labels:
    app.kubernetes.io/name: mcpd
spec:
  # One SQLite file has one writer. Two pods mounting the same volume is not a
  # scaling story, it is a corruption story.
  replicas: 1
  strategy:
    # RollingUpdate would start the new pod while the old one still holds the
    # database. Recreate stops the old pod first and costs a few seconds of
    # downtime, which the SDK buffers cover.
    type: Recreate
  selector:
    matchLabels:
      app.kubernetes.io/name: mcpd
  template:
    metadata:
      labels:
        app.kubernetes.io/name: mcpd
    spec:
      securityContext:
        runAsNonRoot: true
        # The uid and gid the image creates its user with, so this pod and a
        # plain `docker run` own files the same way.
        runAsUser: 10001
        runAsGroup: 10001
        # The volume is created owned by root. Without fsGroup the daemon
        # cannot create its database and exits on the first start.
        fsGroup: 10001
        # The Pod Security `restricted` level refuses a pod without it.
        seccompProfile:
          type: RuntimeDefault
      # Longer than the 30-second request timeout below, so a request still
      # running at SIGTERM can finish before the kubelet kills the process.
      terminationGracePeriodSeconds: 45
      containers:
        - name: mcpd
          image: ghcr.io/mcpd/mcpd:0.1.0
          imagePullPolicy: IfNotPresent
          ports:
            - name: http
              containerPort: 4317
          env:
            - name: MCPD_LISTEN
              value: 0.0.0.0:4317
            - name: MCPD_DATA
              value: /data/mcpd.db
            - name: MCPD_PROJECT
              value: default
            - name: MCPD_RETENTION_DAYS
              value: "30"
            - name: MCPD_LOG_FORMAT
              value: json
            - name: MCPD_INGEST_KEYS
              valueFrom:
                secretKeyRef:
                  name: mcpd-keys
                  key: ingest-keys
            - name: MCPD_READ_KEYS
              valueFrom:
                secretKeyRef:
                  name: mcpd-keys
                  key: read-keys
            - name: MCPD_ADMIN_KEYS
              valueFrom:
                secretKeyRef:
                  name: mcpd-keys
                  key: admin-keys
            # The two scopes of the run surface. A worker key lives in the
            # process that runs step bodies and opens nothing that reads a
            # stored prompt. Optional: with no entry in the Secret the
            # variable is not set at all, and the ingest keys are accepted.
            - name: MCPD_EXECUTE_KEYS
              valueFrom:
                secretKeyRef:
                  name: mcpd-keys
                  key: execute-keys
                  optional: true
            - name: MCPD_WORKER_KEYS
              valueFrom:
                secretKeyRef:
                  name: mcpd-keys
                  key: worker-keys
                  optional: true
            # The run store is a second file on the same volume.
            - name: MCPD_RUNS_DATA
              value: /data/mcpd.runs.db
            - name: MCPD_REQUEST_TIMEOUT_SECONDS
              value: "30"
            # The two bounds on one request: bytes of body, and signals in it
            # once decoded. Lower the first on a small pod, since it is what
            # decides how much memory one request can take.
            - name: MCPD_MAX_BODY_BYTES
              value: "33554432"
            - name: MCPD_MAX_BATCH_SIGNALS
              value: "10000"
            # Set when the interface is served from another origin, as a
            # comma-separated list of origins; and to mask fields the built-in
            # rules do not know, or to lower the 128 KiB cap on a stored string:
            #   MCPD_CORS_ORIGINS, MCPD_REDACT_KEY_CONTAINS, MCPD_REDACT_MAX_STRING
            - name: MCPD_REDACT_KEY
              valueFrom:
                secretKeyRef:
                  name: mcpd-keys
                  key: redact-key
          # Liveness never touches storage, so a slow query cannot restart a
          # process that is working.
          livenessProbe:
            httpGet:
              path: /healthz
              port: http
            periodSeconds: 10
            timeoutSeconds: 2
            failureThreshold: 3
          # Readiness pings the store, so traffic only reaches an instance that
          # can actually write to its database.
          readinessProbe:
            httpGet:
              path: /readyz
              port: http
            periodSeconds: 5
            timeoutSeconds: 2
            failureThreshold: 2
          # Migrations run at start. On a large database that takes longer than
          # the liveness probe would allow, so the startup probe holds it off.
          startupProbe:
            httpGet:
              path: /healthz
              port: http
            periodSeconds: 2
            failureThreshold: 45
          resources:
            requests:
              cpu: 100m
              memory: 128Mi
            limits:
              # No CPU limit: ingest arrives in bursts, and throttling the
              # writer is how a queue turns into dropped spans.
              memory: 512Mi
          securityContext:
            allowPrivilegeEscalation: false
            readOnlyRootFilesystem: true
            runAsNonRoot: true
            capabilities:
              drop:
                - ALL
            seccompProfile:
              type: RuntimeDefault
          volumeMounts:
            - name: data
              mountPath: /data
      volumes:
        - name: data
          persistentVolumeClaim:
            claimName: mcpd-data

apiVersion: v1
kind: Service
metadata:
  name: mcpd
  labels:
    app.kubernetes.io/name: mcpd
spec:
  type: ClusterIP
  selector:
    app.kubernetes.io/name: mcpd
  ports:
    - name: http
      port: 4317
      targetPort: http
      protocol: TCP

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: mcpd-data
  labels:
    app.kubernetes.io/name: mcpd
spec:
  accessModes:
    # ReadWriteOnce, and not because of a quota. SQLite locking is only correct
    # on a local block device: on NFS or any other shared filesystem the locks
    # are advisory at best and the database will eventually be corrupted.
    - ReadWriteOnce
  resources:
    requests:
      storage: 20Gi
  # storageClassName: gp3

# A template, not part of the files beside it.
#
# The extension is .example on purpose. `kubectl apply -f deploy/k8s/` applies
# every manifest in this directory, and a Secret applied as written would put
# these placeholder strings into production as the keys. Create the Secret
# from the command line instead, with keys generated on the spot:
#
#   kubectl -n mcpd create secret generic mcpd-keys \
#     --from-literal=ingest-keys="$(openssl rand -hex 32)" \
#     --from-literal=read-keys="$(openssl rand -hex 32)" \
#     --from-literal=admin-keys="$(openssl rand -hex 32)" \
#     --from-literal=redact-key="$(openssl rand -hex 32)"
#
# Add execute-keys and worker-keys the same way once a worker runs outside the
# cluster; until then the deployment accepts the ingest keys for both.
#
# Or copy this file, replace every value with the output of
# `openssl rand -hex 32`, apply it by name, and do not commit the result.
apiVersion: v1
kind: Secret
metadata:
  name: mcpd-keys
  labels:
    app.kubernetes.io/name: mcpd
type: Opaque
stringData:
  # Comma-separated. One key per fleet or per team means a leaked key can be
  # revoked without redeploying every agent.
  ingest-keys: REPLACE_WITH_A_RANDOM_KEY
  # Never the same value as an ingest key.
  read-keys: REPLACE_WITH_A_DIFFERENT_RANDOM_KEY
  # Keys permitted to delete data and read the audit log. Without this entry
  # the daemon accepts the read keys for admin work, so every read key can
  # delete a trace; `mcpd doctor` reports that as a warning.
  admin-keys: REPLACE_WITH_A_THIRD_RANDOM_KEY
  # Keys permitted to start, cancel and signal runs.
  execute-keys: REPLACE_WITH_A_FIFTH_RANDOM_KEY
  # Keys permitted to claim steps and report their outcome. This one lives in
  # the process that runs step bodies, so it is never the read key.
  worker-keys: REPLACE_WITH_A_SIXTH_RANDOM_KEY
  # Salt for the hashes redaction leaves behind.
  redact-key: REPLACE_WITH_A_FOURTH_RANDOM_KEY

# mcpd chart values.
#
# The chart refuses to install without keys. That is deliberate: a daemon on a
# cluster network with open ingest accepts writes from anything that can reach
# the Service, and a chart that lets you find that out later is not doing its
# job. Set keys.ingest and keys.read, or point keys.existingSecret at a Secret
# you manage yourself.

image:
  repository: ghcr.io/mcpd/mcpd
  # Empty means the chart's appVersion. Pin it in production.
  tag: ""
  pullPolicy: IfNotPresent

imagePullSecrets: []
nameOverride: ""
fullnameOverride: ""

# Daemon configuration. Each of these maps to one environment variable.
config:
  # The container port and the NetworkPolicy port are read from the number
  # after the last colon, so moving the listener moves both.
  listen: 0.0.0.0:4317
  dataPath: /data/mcpd.db
  project: default
  # Days to keep signals. Empty or 0 keeps everything for ever, and the chart
  # then sets no MCPD_RETENTION_DAYS at all.
  retentionDays: 30
  # Fraction of traces to keep, 0.0 to 1.0. Empty keeps all of them.
  sample: ""
  logFormat: json
  # Turn off built-in redaction. Only sensible when something upstream already
  # redacts.
  noRedact: false
  # Mask any value whose key contains one of these, on top of the built-in
  # rules. Matched on lowercase substrings of the key.
  redactKeyContains: []
  # Longest single string stored, in bytes. Empty keeps the built-in 128 KiB.
  redactMaxString: ""
  # Where the run store lives, when runs.enabled is true. It must be inside the
  # directory of dataPath, because that directory is the only writable mount.
  # Empty derives it from dataPath: /data/mcpd.runs.db for the default. "off"
  # is the same as runs.enabled false.
  runsPath: ""
  # Browser origins allowed to call the query API from another site, such as
  # an interface served from a portal. Empty answers no cross-origin request.
  corsOrigins: []
  # Longest a request may take before it is answered with a 503. Empty keeps
  # the built-in 30 seconds. Raise terminationGracePeriodSeconds with it.
  requestTimeoutSeconds: ""

# An external database for signals, instead of the embedded file.
#
# An external store is what lets mcpd run more than one pod: the single writer
# and the single replica are limits of the SQLite file, not of mcpd. It is half
# of what it takes, though. The run store is always an embedded file (see
# `runs` below), so more than one replica also needs runs.enabled false.
#
# `type` decides the mode, never the URLs. That is what lets a URL live only in
# a Secret you manage: set the type here, point keys.existingSecret at the
# Secret, and leave the URL values empty. A URL value with type none, or with
# the other type, refuses to render rather than being ignored.
externalStore:
  # none, postgres or clickhouse.
  type: none
  # A Postgres connection string. Reach for this first: it lifts both limits on
  # a database most teams already run, back up and monitor.
  postgresUrl: ""
  # A ClickHouse HTTP endpoint. Reach for this when retention is measured in
  # billions of spans.
  clickhouseUrl: ""
  clickhouseDatabase: mcpd
  clickhouseUser: ""
  # Both URLs and the ClickHouse password carry credentials, so they are held in
  # the chart's Secret rather than in the pod spec. With keys.existingSecret,
  # the chart creates no Secret: put them in yours under the keys postgres-url,
  # clickhouse-url and clickhouse-password, and leave these values empty.
  clickhousePassword: ""

# The durable run surface: definitions, the journal of step attempts, deadlines
# and waits.
#
# Its store is an embedded SQLite file whatever the signal store is, so while
# it is on, the pod keeps a file on a volume and runs as one replica. With an
# external store that volume holds the run store alone. Turn it off to run
# several pods against an external store; the daemon then answers the run
# endpoints with a 503 that says so, and nothing else changes.
runs:
  enabled: true

# Pods to run. More than one needs both an external store and runs.enabled
# false, because each embedded SQLite file has one writer. The chart refuses to
# render a larger count otherwise, rather than pinning it to 1 behind your back.
replicaCount: 1

keys:
  # Comma-separated keys permitted to write.
  ingest: ""
  # Comma-separated keys permitted to read stored prompts and completions.
  read: ""
  # Comma-separated keys permitted to change stored data: scores, feedback,
  # datasets, experiments and acknowledgements. Unset means the ingest keys are
  # accepted, which is what a deployment written before this scope existed did.
  # The ingest key is in every container that emits a span, so separating them
  # is worth doing once you have more than one team.
  write: ""
  # Comma-separated keys permitted to destroy data and read the audit log.
  # Unset means the read keys are accepted, so a read key can delete a trace.
  # `mcpd doctor` reports that as a warning and names this setting.
  admin: ""
  # Comma-separated keys permitted to start, cancel and signal runs. Unset
  # means the write keys are accepted, and an admin key always is.
  execute: ""
  # Comma-separated keys permitted to claim steps and report their outcome.
  # This is the key that lives in the process running step bodies. Unset means
  # the write keys are accepted, and an admin key always is.
  worker: ""
  # Salt for the hashes redaction leaves behind. Optional, but set it anywhere
  # that hashes: without it, digests of short identifiers can be guessed.
  redact: ""
  # Use a Secret you already manage instead of the values above. It must carry
  # ingest-keys and read-keys, and optionally write-keys, admin-keys,
  # execute-keys, worker-keys and redact-key.
  existingSecret: ""

# The two bounds on one request. Empty means the built-in defaults, 33554432
# bytes (32 MiB) of body and 10000 signals per request.
#
# The byte cap is what bounds how much memory one request can take before
# anything is decoded, so lower it on a small pod. The signal cap is counted
# across the whole request on every ingest door, whether the signals arrive as
# one batch, an array of batches or an NDJSON stream.
maxBodyBytes: ""
maxBatchSignals: ""

# A ceiling on signals stored per project per minute. Empty means no ceiling,
# which is what a deployment that never sets it had before quotas existed.
#
# It stops one project spending the whole daemon. Signals over the ceiling are
# refused and reported with the count and the project, never dropped in silence,
# and the rest of the batch is still stored.
quotaPerMinute: ""

# Record WHICH PERSON acted on an audit row, not only which key.
#
# mcpd has no identity provider and is not getting one, so the identity comes
# from the ingress already in front of it. Both halves are required: the header
# your ingress sets, and the ranges allowed to set it. A header is a string
# anyone who can reach the port may send, so mcpd reads it only from an address
# you have named here. A request from anywhere else is served normally and its
# audit row carries no subject.
#
# Set trustedProxyCidrs to the range your ingress controller runs in, not to
# 0.0.0.0/0, which would trust every client to name itself.
identity:
  # For example x-forwarded-user, x-forwarded-email or x-auth-request-user.
  header: ""
  # A list of CIDR ranges, for example ["10.42.0.0/16"].
  trustedProxyCidrs: []
  # The header your proxy puts the client's address in, for example
  # cf-connecting-ip. Read only from trustedProxyCidrs. The sign-up and log-in
  # limits count this address; without it they count the proxy's.
  clientIpHeader: ""

# Open sign-up: anyone may create an account, which owns one new project and
# its own API keys. Off by default. On, a request with no key is refused
# everywhere except the health probes, sign-up and log-in. Set
# identity.clientIpHeader and identity.trustedProxyCidrs as well when an
# ingress is in front, so the per-address limits count clients.
signup:
  enabled: false
  # Where the accounts file goes. Empty puts it beside the data file, as
  # mcpd.accounts.db, which is on the volume.
  accountsData: ""

# Copy every stored span on to another OTLP endpoint. The local write always
# happens first, so a slow or absent destination never costs you the data.
forward:
  # Base URL, not the /v1/traces path; mcpd appends it.
  endpoint: ""
  # Headers as "Name: value" strings. A credential here lands in the Secret.
  headers: []

# The volume for whatever the pod keeps on disk: the signal store and the run
# store on the embedded store, or the run store alone with an external one.
# Not used with an external store and runs.enabled false, since nothing local
# is left to keep.
#
# With enabled false the chart mounts an emptyDir instead, so the daemon can
# still write, and everything it wrote is gone when the pod is.
persistence:
  enabled: true
  # Sized for the embedded signal store. A volume that holds the run store
  # alone needs far less.
  size: 20Gi
  # Leave empty for the cluster default. SQLite locking is only correct on a
  # local block device, so do not point this at NFS.
  storageClass: ""
  existingClaim: ""

service:
  type: ClusterIP
  port: 4317
  annotations: {}

# Everything from here to `resources` is off by default, so an install that sets
# nothing renders the same four objects it always did. Each block is here
# because a chart review asks a question this chart could not otherwise answer.

# "What identity does this pod run as, and what can that identity do?"
serviceAccount:
  create: false
  # With create true, empty means the release's fullname. With create false,
  # naming an account you manage yourself puts the pod on it, and leaving it
  # empty keeps the namespace's `default` account, which is today's behaviour.
  name: ""
  annotations: {}
  # mcpd never calls the Kubernetes API, so it has no use for a token.
  # Turn this on only if something you add to the pod needs one.
  automountServiceAccountToken: false

# "How does traffic reach mcpd from outside the cluster, and who terminates
# TLS?"
#
# Not mcpd: it speaks plain HTTP and has no TLS configuration, so the ingress
# controller has to terminate. Two things to know before you publish it.
#
# One path root. mcpd serves OTLP ingest, the query API and the operator
# interface from the same root, so a rule for "/" publishes all three, and your
# ingest keys are what stands between the open internet and a write. There is no
# path prefix that separates them.
#
# Body size. mcpd accepts a 32 MiB batch, and several ingress controllers cap a
# request body at 1 MiB by default, so a batch the daemon would have taken is
# refused before it arrives. On ingress-nginx the annotation to raise is
# `nginx.ingress.kubernetes.io/proxy-body-size`.
ingress:
  enabled: false
  className: ""
  annotations: {}
  hosts:
    - host: mcpd.example.com
      paths:
        - path: /
          pathType: Prefix
  tls: []
  #  - secretName: mcpd-tls
  #    hosts:
  #      - mcpd.example.com

# "Only these namespaces may reach ingest."
#
# The limit belongs in the answer, so here it is. mcpd serves ingest, the query
# API, the operator interface and /metrics on ONE port, and a NetworkPolicy
# matches pods and ports, never paths. This gates the whole daemon or nothing:
# every source you allow in for ingest can also reach /v1/api and read stored
# prompts and completions. The read key is what holds those apart, not this
# policy. A split at the network layer would need a second listener, and mcpd
# does not have one.
#
# What it does do is still worth having. With no policy in the namespace, every
# pod in the cluster can open a connection to mcpd. With one, only these can.
#
# A trap worth knowing first: some CNI plugins enforce policy on traffic
# arriving from the node, and the kubelet's liveness and readiness probes
# arrive that way. On those clusters, add the node CIDR to `ipBlocks`, or the
# pod never becomes ready and the rollout stalls.
networkPolicy:
  enabled: false
  ingress:
    # Whole namespaces, by label. Kubernetes sets
    # `kubernetes.io/metadata.name` on every namespace itself, so this works
    # without labelling anything first.
    namespaceSelectors: []
    #  - matchLabels:
    #      kubernetes.io/metadata.name: agents
    # Pods in mcpd's OWN namespace. A podSelector with no namespaceSelector
    # beside it never reaches across a namespace boundary.
    podSelectors: []
    #  - matchLabels:
    #      app.kubernetes.io/part-of: checkout-agents
    ipBlocks: []
    #  - cidr: 10.42.0.0/16
    #    except:
    #      - 10.42.7.0/24
    # Whole `from` entries, written out and appended as they are. Use this for
    # the one thing the three lists above cannot say: a namespaceSelector and a
    # podSelector inside a SINGLE entry, which means "those pods, in those
    # namespaces" rather than "either of the two".
    extraFrom: []
    #  - namespaceSelector:
    #      matchLabels:
    #        kubernetes.io/metadata.name: agents
    #    podSelector:
    #      matchLabels:
    #        app.kubernetes.io/name: checkout-agent
  egress:
    # Leave this off unless you have a reason. Restricting egress breaks four
    # things and breaks them quietly, because mcpd logs a warning and carries
    # on: alert webhooks, forwarding to another OTLP endpoint, the judge's model
    # endpoint, and an external Postgres or ClickHouse.
    enabled: false
    allowDns: true
    dnsNamespace: kube-system
    # Complete egress rules, appended as written, because what mcpd is allowed
    # to dial depends entirely on what you configured it to dial.
    rules: []

# "What happens to ingest while a node is drained?"
#
# Only answerable with more than one replica, which takes an external store and
# runs.enabled false. With one replica, a budget over that pod either blocks
# every drain or permits every one. The chart refuses to render it there rather
# than let you discover which during a cluster upgrade.
podDisruptionBudget:
  enabled: false
  # Set one of these, never both. With replicaCount 2, minAvailable 1 lets one
  # pod go at a time and keeps ingest up through a drain.
  minAvailable: 1
  maxUnavailable: ""

# "Is the collector itself monitored?"
#
# Needs the Prometheus Operator's CRDs in the cluster. Without them the install
# fails on a kind the API server does not know, which is why this is off rather
# than on with a capability check: a chart that silently drops the object you
# asked for is worse than one that fails.
#
# There is no credential below because mcpd serves /metrics with no key. It
# exposes counters and uptime, not stored prompts or completions.
serviceMonitor:
  enabled: false
  # Empty means the release's namespace.
  namespace: ""
  interval: 30s
  scrapeTimeout: 10s
  # The labels your Prometheus selects ServiceMonitors by. Without the ones it
  # expects, this object is created and never scraped, and nothing reports that.
  labels: {}
  relabelings: []
  metricRelabelings: []

resources:
  requests:
    cpu: 100m
    memory: 128Mi
  limits:
    memory: 512Mi

# The uid and gid are the ones the image creates its user with, so the pod and
# a plain `docker run` own files the same way. fsGroup is what makes a new
# volume, created owned by root, writable to that user. The seccomp profile is
# required by the Pod Security `restricted` level, which refuses the pod
# without it.
podSecurityContext:
  runAsNonRoot: true
  runAsUser: 10001
  runAsGroup: 10001
  fsGroup: 10001
  seccompProfile:
    type: RuntimeDefault

securityContext:
  allowPrivilegeEscalation: false
  readOnlyRootFilesystem: true
  runAsNonRoot: true
  capabilities:
    drop:
      - ALL
  seccompProfile:
    type: RuntimeDefault

# Longer than the longest request. A request may run for the request timeout,
# 30 seconds by default, and the pod has to outlive it after SIGTERM or the
# kubelet kills it mid-write. Raise it with config.requestTimeoutSeconds.
terminationGracePeriodSeconds: 45

# The settings too structured for an environment variable: monitors, SLOs, the
# judge, per-project keys, retention and sampling under `projects`, and the run
# store's timings under `runs`. Written here as the JSON object the daemon's
# --config-file reads (see https://mcpd.sh/docs/configuration), mounted
# read-only at /etc/mcpd/mcpd.json, and named in MCPD_CONFIG_FILE. A change
# restarts the pod, as a key rotation does.
#
# Per-project keys, the judge's api_key and forward headers are credentials. A
# ConfigMap is readable by anything allowed to list ConfigMaps in the
# namespace, so the chart refuses to put content carrying any of them in one.
# Set kind to Secret, or keep the file in a Secret you manage and name it in
# existingSecret.
configFile:
  content: {}
  #  monitors:
  #    - name: error-rate
  #      ...
  #  projects:
  #    checkout:
  #      retention_days: 90
  # ConfigMap or Secret: the object `content` is rendered into.
  kind: ConfigMap
  # A Secret you manage that holds the file, instead of `content`.
  existingSecret: ""
  # The entry in existingSecret that holds the file.
  existingSecretKey: mcpd.json

# Extra environment variables, as Kubernetes writes them, appended after the
# ones the chart sets. Use it for a setting this chart has no value for, or to
# read one from a Secret of your own with valueFrom.
extraEnv: []
#  - name: MCPD_FORWARD_HEADERS
#    valueFrom:
#      secretKeyRef:
#        name: otlp-credentials
#        key: headers

# Extra volumes and where to mount them, for example a CA bundle for a
# ClickHouse or a judge endpoint behind a private certificate authority.
extraVolumes: []
extraVolumeMounts: []

podAnnotations: {}
nodeSelector: {}
tolerations: []
affinity: {}